Ring Size Guide

Find your accurate ring size at home in minutes using our simple method and downloadable PDF.

1. Print the Guide

Print our Ring Size PDF Guide at 100% scale to ensure accurate measurements. 

2. Option A (Fast) - Use a Ring You Already Own

1. Place a ring that fits you comfortably over the printed circles (If this is for a gift, discreetly borrow a ring the person already wears).
2. Align the inner edge with the closest match.
3. If the ring sits between two sizes, your size is a half-size (select the larger one).

3. Option B (Accurate) - Use the Ring Sizer

1. Cut out the sizing tool (bottom of the page)
2. Slide the end tab "B" through slot "A" and wrap the
   sizer around the base of the finger.
3. Make sure to allow size for the knuckle.
4. The number aligned with slot "A" is your ring size.
5. If the measurement lands between two numbers, your size is a half size (select the larger one).

4. Notes to confirm your Fit

Keep in mind:

• Wider bands - They fit tighter (such as Eternity Bands): ½ size up.
• Thick or dome-shaped bands 
• Stacking rings - Multiple slim bands together increases total width: ½ size up.
• Wide signet rings: Large top surface + wide shoulders increases tightness → often need a small size increase.
• Non-round or sculpted shanks: Knife-edge, square, or heavily shaped shanks don’t slide as easily, this can feel tighter: ½ size up
• High-profile + heavy-top designs: Heavy tops may cause spinning if too loose.  People usually size down ¼ size for stability.

Need Help or Resizing?

We offer complimentary service for resizing assistance. Contact us anytime.